new products

Vibration monitor
Vibration monitor


Vibration monitor
Vibration monitor

NEW SWARM Vibration monitor


The Omnidots Swarm is a high-tech budget-friendly vibration monitor that measures in accordance with international standards.


It offers easy installation and a cloud-based web platform, on which measurements are collected and processed into insightful data that may be accessed anytime. 


Large groups of users can use this system to gain immediate insight into results from all of the measurement points in a particular area.

SWARM vibration monitor features:

  • Triaxial sensor

  • Automatic axis orientation

  • Frequency range 0.5 - 250 Hz

  • Velocity range 0.2 - 50.0 mm/s

  • 24/7 access to measurement data

  • SIM card included

  • Measurements in accordance with DIN4150 and Dutch SBR guidelines


Fast load cell USB interface features:

  • Ultra-Fast Data Analysis – 4800 Samples per Second

  • 13 Bit Resolution for Improved Accuracy

  • Simple USB Connection

  • ASCII Protocol

  • Free FSU Toolkit Software Included

  • High Stability with 1 part in 8000 noise free resolution

  • Works With Any Full-Bridge Strain Gauge Sensor

NEW Ultra-Fast USB Load Cell Interface


At 4800 samples per second, this ultra-fast USB load cell interface delivers fast data capture direct to your PC.  Thanks to its 13 bit noise free resolution, improved accuracy is guaranteed.  No additional power supply is needed as it plugs directly into your PCs USB port. 


PC based calibration is easy with the FREE downloadable software with fast data capture of up to 30 minutes of data at 4800Hz (4.8kHz).


So, to convert a transducer signal to a digital USB serial output fast, use the DSCUSB-FQ ultra-fast USB load cell interface.

NEW Permanently Submersible S-Beam Load Cell


The new DBBSUB permanently submersible s-beam load cell is designed for long-term submersion in water.  It is hermetically sealed promising accurate measurements to a depth of 10m/1bar.


It is ideal for flood susceptible locations, hydrostatic testing and off-shore applications.  Its dual bending beam design ensures high accuracy tension and compression measurements to less than ±0.02% of full scale output.


Submersible load cell features:

  • IP68 Waterproof to 10m/1bar

  • Hermetically Sealed for Long-Term Submersion

  • Capacities: 0-0.5kN up to 0-5kN

  • High Accuracy: <±0.02% of Full Scale Output

NEW Static Load Tester


Static load testing is used to evaluate the load resistance behavior of deep foundations prior to structure construction. It differs from rapid and dynamic load testing in that the load is applied to the deep foundation slower. Static Load Tests can be performed to validate foundation design assumptions regarding the axial compression or axial tension resistance provided by a deep foundation element, or its deflected shape under a lateral load.


Static Load Tester features:

  • Allows monitoring of multiple data collection boxes at once

  • Up to 16 channels per data acquisition box with smart universal inputs

  • Offers real-time graphical presentation of load, strain, displacement and pressure measurements

NEW Water Level Temperature meter


The Model 201 Water Level Temperature (WLT) Meter is ideal for measuring static water levels, as well as profiling temperature in wells, boreholes, tanks and open water.


Accurate temperature measurements are clearly displayed on an LCD readout on the faceplate, from -20ºC to +125ºC.

Water level and probe depth measurements are read off the Solinst durable PVDF flat tape. Tape lengths are available up to
2000 ft (600 m).

• Accurately measure temperature from -20ºC to +125ºC

• Tape lengths to 2000 ft (600 m)

• Corrosion and chemical-resistant PVDF flat tape

• Standard 9V alkaline battery gives 90 hours of use

• Automatic shut-off after 8 minutes

• Sturdy, standalone reel with ergonomic handle and brake

• No user calibration is required

Water Level Temperature Meter features:

NEW Vertical Digital Inclinometer PRO System 


  • Includes biaxial 500mm probe, cable, cable reel & charger, cable gate, robust Field Tablet & charger, calibration certificate and manual.

  • Measuring range:  ±250mm/500mm  (±30 arc degree)

  • Includes software In-Profile

The key features and benefits of the new C17 PRO include:


  • Lightweight and portable, only 7kg for the 50 metre model

  • QR code feature recognises borehole - quicker readings

  • Moulded probe coupling traverses tighter casing bend radii

  • Robust IP67 rated tablet - able to transfer data from site

  • Large tablet display with impressive 20 hours battery life

  • Kevlar reinforced cable with low wear markers – more durable

  • Up to 40% quicker using the single handed “autorun” feature – time saving


NEW Pundit® 250 Array Ultrasonic Imaging Scanner


The Pundit 250 Array brings a quantum leap in the ultrasonic pulse echo testing. A number of unique innovations make the Ultrasonic multi-channel tomography instrument the best and fastest solution for thickness measurements, detecting defects and localizing objects which cannot be easily detected by any other technology. This includes the assessment of thick concrete elements such as tunnel linings as well as pipes and tendon ducts beyond the rebar layer.

The unique real-time B-scan and panorama views allow high resolution imaging directly on-site. Upgrade possibilities to double handle version for increased control and to 16 channels to double the scan width.


  • Real-time B-scan and panorama mode for extended scans of several meters

  • Single handed positioning with upgrades to double handle and 16 channels for large area scans

  • High resolution of defects, rebars and tendon ducts with superior near field performance

  • Measuring Range: Up to 1 m depending on concrete quality

  • Bandwidth: 15 to 100 kHz

  • Technology: Phased array ultrasonic pulse echo

  • Measuring Resolution: 1 μs

  • Pulse Voltage UPV: - 

  • Pulse Voltage UPE: ±150 V

  • Receiver Gain: 1 to 10’000x (0 to 80 dB)

  • Nominal transducer frequency: 50 kHz shear wave

  • Pulse Shape: Square wave

  • Pulse Delay: 8 ms – 200 ms

  • Number Of Channels: 8 (with upgrade option to 16)

The LTC Levelogger Edge provides the convenience of conductivity, temperature, and water level measurements in one instrument. The LTC Levelogger Edge combines a datalogger with memory for 27,000 data sets, 8-year battery, Hastelloy pressure sensor, and temperature and conductivity sensors in a small waterproof housing. Titanium ceramic PVD coating protects from corrosion.


NEW LTC Levelogger Edge



  • High accuracy conductivity readings

  • 6 pressure ranges available

  • Excellent corrosion resistance

  • Corrosion resistant Hastelloy pressure sensor

  • Titanium ceramic PVD coating

  • Single or multi-point conductivity calibration

  • Basic and advanced data compensation options

  • LTC Levelogger Edge has a 3 Year Warranty